X2t Light Up Red Then Turn Blue in Charger
TheEdifier X2 comes with Bluetooth 5.1, a total battery life of 4 hours of playtime, a 13mm dynamic driver, Qualcomm audio technology, cVc8.0 noise reduction, the IPX5 certification, AAC, and SBC codecs, and much more. Learn how to use them with this newEdifier X2 Manual.
Edifier X2 Manual | Everything You Need To Know!
Edifier X2 Manual | How to Pair / Connect?
To iOS and Android phones
Step 1:Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a blue light will turn on for 1 second. When a red and blue light starts flashing quickly, they will be ready to pair to any device.
Step 2:Go to the device's Bluetooth settings.
Step 3:Select "Edifier X2". If a password is needed, type "0000".
Step 4:After that, the pairing will be done.
To PC (Windows)
Step 1: Turn on Window's Bluetooth.
Step 2: Go to the settings.
Step 3: Go to "Bluetooth and other devices".
Step 4: Click on "Add device".
Step 5: Click on Bluetooth.
Step 6:Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a blue light will turn on for 1 second. When a red and blue light starts flashing quickly, they will be ready to pair to any device.
Step 7:Select "Edifier X2". If a password is needed, type "0000".
Step 8: After that, the pairing will be done.
Edifier X2 Manual | How to Wear?
Step 1: Take both earbuds out of the charging case.
Step 2: Identify the left and right earbuds.
Step 3: Choose the ear tips that best suit your ears.
Step 4: Insert the headphones into the inner canal of the ears.
Step 5:Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.
Edifier X2 Manual | How to Turn On and Off?
Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a blue light will turn on for 1 second.
Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.
How to Control? / How to Operate? – Instructions
- Play or pause music: Press the multifunction touch button on any of the earbuds two times.
- Play the next song: Press the multifunction touch button on the right earbud three times.
- Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
- End a call: Press the multifunction touch button on any of the earbuds two times.
- Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 3 seconds.
- Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for 3 seconds.
Edifier X2 Manual | How to Activate Gaming Mode?
To activate or deactivate the mono mode in the Edifier X2, all you have to do is to press the multifunction touch button on the left earbud three times.
Edifier X2 Mini Manual | How to Activate Mono Mode?
To activate or deactivate the mono mode in theEdifier X2, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.
Edifier X2 Mini Manual | How to Charge
Earbuds
To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start chargingautomatically.
Charging case
To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the includedUSB-A toC cable. It will start chargingautomatically.
Edifier X2 Manual | LED Light Status
Earbuds
- Blue light on for 1 second: Earbuds turn on.
- Red and blue light start flashing quickly: Earbuds ready to pair.
- Blue light starts flashing and turns off: Earbuds pairing.
Charging case
- Red light on: Case/earbuds charging.
- Red light off: Case/earbuds fully charged.
Edifier X2 Manual | How to Reset?
Step 1: Press and hold the multifunction touch button on both earbuds for 8 seconds, until a blue light starts flashing and turns off.
Step 2: Place the earbuds into the charging case.
Step 3: Take the earbuds out of the charging case.
Step 4: Pair the earbuds to any device.
Some Common Earbuds Problems & Troubleshooting
Left / Right / One side of the earbuds have stopped working
If this happens, it may be because it islow on battery or it did notconnect correctly with the device. To fix this, you can do the following:
1. Try charging the earbud that is not working or both, placing them in the charging case.
2. Try factory resetting the earbuds.
3. Check if the earbuds are operating within a normal working range.
If that doesn't work, the earbud is probablyfaulty, and I can go for a refund or replacement of it.
Left / Right / One side of the earbuds has low volume
If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:
1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.
2.Try factory resetting the earbuds.
Microphone not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
If the microphone is muted, check the device microphone volume. If that doesn't work, that means that there might be adefect in the earbud, so try replacing them or get a refund.
Edifier X2 earbuds not connecting to Windows/laptop/PC
If the earbuds are earbudsnot connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:
1.Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,
2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.
3. Try resetting the earbuds.
FAQs
Are Edifier X2 waterproof?
The Edifier X2 have the IPX5 certification, which means they're dustproof and protected against water projected from a nozzle.
Does Edifier X2 have a microphone?
Yes, the Edifier X2 have integrated microphones
Do Edifier X2 have low latency/gaming mode?
Yes, the Edifier X2 have a low latency/gaming mode.
How to know when Edifier X2 are fully charged?
The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged.
Can Edifier X2 connect to PC and Laptop?
Yes, the Edifier X2 can connect to PCs, laptops, and tablets.
We hope you now know how to operate the earphone from the above Edifier X2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.
In case you want or need to contact the Edifier company, all your information can be found on itsContact Us page, where you can find numbers and emails available for several countries! Also, they have aSupport page, with FAQs and information about their products!
Source: https://www.thephonetalks.com/edifier-x2-manual/
0 Response to "X2t Light Up Red Then Turn Blue in Charger"
Post a Comment